Buffer Tank Process Water Tank SUS304 Steel Tank

Buffer Tank Process Water Tank SUS304 Steel Tank

$99999-119999 /Set/Sets

Payment Type:	L/C,T/T,D/P
Incoterm:	FOB,CFR,CIF,EXW
Min. Order:	1 Set/Sets
Transportation:	Ocean,Land
Port:	Q,I,N

Contact Now

Product Description

Product Attributes

Model No.: LPT6000

Brand: LIPP

Certification: ISO9001/ISO14001/ISO45001

Packaging & Delivery

Selling Units

Set/Sets

The file is encrypted. Please fill in the following information to continue accessing it

Product Description

Applicable Fields:

- Waste Water Tank

- Sewage sludge tank

- Process water tank

- Storage tank

- Firefighting water tank

- Mixing and compensation tank

- Buffer tank

- Stackable sludge tank

- Filtrate water tank

- Final sedimentation tank

Other special tanks on request

Specification:

Technical Data

Diameter: 3.5 - 38 m

Height: 5 - 23 m

Volume: 100m3 - 10,000m3

pH level: 3 - 13

Material

Galvanized steel / black steel

Stainless steel (SUS304, SUS316...)

Verinox (stainless steel + galvanized steel)

Accessories

Roofs and covers

Tank bottom

Pumping and mixing technology

Tank insulation

Stairways, ladders, platforms, connection pieces, manholes, etc.

Dimension Sheet:

Company Tour

Delivery Preparation

Standard for sea packaging of steel structure products

1. Requirements for packaging materials

Wooden box/iron box

The wooden box should be sturdy and rainproof design, equipped with load-bearing sleepers at the bottom and reserved forklift holes, and the weight of a single box should not exceed 1 ton.

The iron box is suitable for long-distance transportation, the box body is firmly welded and the lifting lugs are set, and the steel plate can be recycled later.

Strapping and packing

Slender components (such as rods, tie bars) can be bundled with woven bags or wires, and the weight of each bundle should not be too large, so as to avoid the spreader directly hooking and bundling materials.

2. Anti-rust and sealing treatment

All steel structures need to be treated with anti-rust treatment (e.g. anti-rust oil or galvanized) and encapsulated with moisture-proof materials (plastic film, woven bags) to prevent seawater erosion.

The welded seams must meet the requirements of the "Maritime Hazard Regulations": liquid containers above 40L need to be fully welded, and small-capacity containers can be mechanically combined or welded.

3. Fixation and reinforcement methods

Internal buffering

Use foam boards, air cushion films, or wood strips to fill the voids to reduce collisions caused by transport vibrations.

External reinforcement

Large goods need to be fixed with steel belts, wire ropes or straps, and rubber pads are installed on the contact parts to prevent wear; Coil steel and other need to be skids anti-slip. Pallet stacking needs to be centered in the center of gravity and fixed with stretch film or strapping.

4. Identification and labeling specifications

The packaging should be clearly marked with weight, size, number, hoisting point and other information. Dangerous goods or special goods shall be affixed with classification labels and warning signs in accordance with the International Maritime Dangerous Goods Code.

5. Handling of special components

Small Parts/Spare Parts

Parts below 25kg need to be packed or bundled, with a packing list and marked with number, net weight, etc. Precision components

When it is fixed and transported with the main body, it needs to be bolted or bundled to avoid loss or deformation.

Hot Products